GUS Daily Digest Fri, 2 Dec 94 9:37 PST Volume 17: Issue 2 Today's Topics: arh!!!! Can safely use Adaptec 1542B w/ GUS, Megaem, SBOS. Configuring GUS in Linux Digest vol 17 #1 Flashback and Dune II GUS / OS2 warp.... GUS Daily Digest V16 #30 (3 msgs) GUS Daily Digest V17 #1 (2 msgs) How/Where can I get gus files without FTP access? Indycar Midas Sound System for Windows? nascar OS/2 drivers? problem with getting MEGAEM to work with EarthSiege for CD-ROM Quest for Glory IV Standard Info: - Meta-info about the GUS can be found at the end of the Digest. - Before you ask a question, please READ THE FAQ. ---------------------------------------------------------------------- Date: Thu, 1 Dec 1994 16:47:04 -0700 (MST) From: Ignatius Tam Subject: arh!!!! ok, now it's my turn....5 copies of yesterday's digest... arhhhhhhhh i would unsubscribe if this occured next time :) -iGnatius ------------------------------ Date: Fri, 02 Dec 1994 09:17:17 +0100 From: Robert Virding Subject: Can safely use Adaptec 1542B w/ GUS, Megaem, SBOS. > Date: Wed, 30 Nov 1994 11:03:12 GMT > From: Clarke Brunt > Subject: Re: GUS and Adaptec 1542b SCSI controller > > >I have an Adaptec 1542B SCSI controller and a Ultrasound. The 1542B > >is my boot device, and, while the card has strappable I/O addresses, > >the BIOS ROM is hard coded to use address 330. This conflicts with > >one of the address on the Ultrasound, and causes problems (Sound > >Blaster emulation doesn't work.) > > Is this right? Does a BIOS really use an IO address? I though that a > BIOS was likely to occupy a block of high numbered addresses somewhere > bwtween 640k and 1M. Or do I misunderstand - perhaps you mean that > you can move the card away from 330, but then the BIOS refuses to > use it? Perhaps Adaptec can supply a new BIOS ROM to plug in. > > Anyway the problem is that 330 is the standard > address for some Roland contraption that you are trying to emulate, > so if you can't shift the SCSI card away from there, then you have > then danger of attempts to access your SCSI devices being intercepted > by the emulation program. Don't know about SBOS, but I thought the docs > for megaem discussed this, and that there was some kind of switch so > that it could attempt to distinguish between the uses of the same > address. There were also dire warnings about danger to the data on > your HD! I don't really see the problem. I have an Adaptec 1542 and have just restrapped the i/o address to 334H (if I can remember correctly). Now everything works fine: Megaem without any extra flags, SBOS, the lot. Robert ------------------------------ Date: Thu, 1 Dec 1994 14:17:49 -0800 (PST) From: John Tomaszewski Subject: Configuring GUS in Linux I'm about to reconfigure my kernel to take advantage of my new GUS but I'm not sure of how to answer some of the prompts (i.e. is it desireable or required to emulate other cards at times?). Assuming I use the default DMA, IRQ, etc. (should I?) could someone help fill in some of the blanks: (my guesses in parenthesis) 1) ...full version of driver? (n)__ 2) ...DISABLE the sound driver? (n)__ 3) Enable PAS or AdLib? _________________ (I know the SB shouldn't be enabled with the GUS at 0x220 so should I put the GUS elswhere and enable SB?) 4) SB Pro support? _____ 5) SB 16 support? _____ 6) digitized voice support? _____ 7) MIDI interface support? (y)__ (is this strictly for external devices or for MIDI software too?) 8) FM synth. support? (y)__ I guess that's it. Any help would be appreciated. Thanks. ******************************************************************** ** ** ** ** * ** DEPARTMENT OF CHEMISTRY ** ** ** ** ** * ** tomasz@helix.chem.washington.edu ** ** ** ** ** * ** ** ** ***** ***** JOHN TOMASZEWSKI ** ******************************************************************** ------------------------------ Date: Fri, 2 Dec 1994 15:47:37 GMT From: "Mark D. Billinge" Subject: Digest vol 17 #1 What's happening with the digest this week? I recieved number vol 16 #30 twice, and why were there 8 posts of #30 in volume 17 #1?! Mark ------------------------------ Date: Thu, 1 Dec 1994 19:10:10 -0500 (EST) From: Mike Batchelor Subject: Re: Flashback and Dune II Not the GUS Server once wrote... > > ------------------------------ > > Date: Thu, 1 Dec 1994 14:40:17 +0100 > From: mogens beltoft > Subject: Flashback and Dune II > > I'm not exactly satisfied with the sound in Flaskback (I'm using Megaem), so > could anyone please help me with the configuration, or other possibilities. Use SBOS. There isn't a lot of music in Flashback anyway. MegaEm sometimes forgets to stop playing notes. SBOS doesn't, and the small amount of music there is, doesn't sound any better or worse with SBOS. Digital FX are the same with both. Naturally, you set up FB for a Sound Blaster when using SBOS. > And when I read the glist it suggested me to find the AIL patch for Dune II ?? > What is the filename and where do I find it, and what do I do?? dune2ail.zip, archive.epas.utoronto.ca under pub/pc/ultrasound, and follow the directions. -- \\\ Mike Batchelor /// mikebat@clark.net \\\ M.Batchelor@babylon4.clark.net /// "Supporting Windows is like buying a puppy. The dog only cost $100, but we spent another $500 cleaning the carpet." - Marc Dodge, "Reality Check", _Open Computing_, December 1994 ------------------------------ Date: Fri, 2 Dec 94 03:15:23 -0800 From: brian@ccnext.ucsf.EDU (Brian Huddleston) Subject: GUS / OS2 warp.... Greetings all, I wanted to ask people out there using OS/2 WARP, how well does the gus/games/ mod players work with it? I've got a dos machine, but am thinking of getting warp (I have a 386-40 with 4mb ram) I keep hearing probs with OS/2 drivers for gus, but are they for the OS/2 native, and the dos emulator works fine, or is it that the GUS'es are having probs through out the software? ps how well does it work with Iplay. I've been noticing that I mostely use my machine for NetSurfing/Playing music/Wordprocess/ and one or two quick action games. Should I stick with DOS? Thanks.... brian@ccnext.ucsf.edu ------------------------------ Date: Thu, 1 Dec 94 14:31:25 MST From: dchow@stu.athabascau.ca (Donald Chow) Subject: Re: GUS Daily Digest V16 #30 (8 msgs) > Date: Wed, 30 Nov 94 16:56 EST > From: Adminstrator > Subject: Mail failure > > FROM: Adminstrator > TO: GUS Daily Digest DATE: 11-30-94 > TIME: 16:50 > SUBJECT: Mail failure > ----------------------------------------------------------------------------- > > User mail received addressed to the following unknown addresses: > aig/granite1/fcass > > ----------------------------------------------------------------------------- > MCI Mail date/time: Wed Nov 30, 1994 1:26 pm EST > Source date/time: Wed Nov 30 09:37:05 PST 1994 What the hell is going on? All this bouncing back and forth of the old digest is driving me nuts! 8copies of digest16 was not amusing! Is the above the problem? I've seen that message a few times in previous digests... If I were I cynic, (and I am) I'd suspect someone was trying to mail-bomb everyone on the digest... Disgruntled AWE owner maybe? ;) Don -- Donald Chow | X-Phile, GATB & SSTB dchow@a.stu.athabascau.ca | Call (202) 555-6431 for a 'IDDG' time bf298@freenet.carleton.ca | Go-o uchi masuka? ------------------------------ Date: Thu, 1 Dec 94 16:19:12 -0500 From: mng@tse.com (Mark C. Ng) Subject: Re: GUS Daily Digest V17 #1 RE: Does Rise of Robots work with GUS? Well I found that te Demo version works ok (digital effects only) with the US . But it doesn't work with the Full version .. I just get cut outsound and only BASE line for music .. sound terrible... It's works as good as if I didin't have one!! Some body else said that It works fine... but I couldn't figure it out!! Mark ------------------------------ Date: Fri, 2 Dec 94 8:51 GMT From: "Mark.Carline Bsc Elec Eng 3rd" Subject: Re: GUS Daily Digest V17 #1 I just wondered if anyone has had any trouble when recording in 8 bit using the GUS ? When I record silence the information that is recorded has got some form of DC offset error (ie I get +DC volts for silence!!) Is there anyway I can change the DC offset level on the GUS card ?? Mark.Carline@uk.ac.unn.heaton ------------------------------ Date: Thu, 1 Dec 1994 21:59:10 -0500 From: ba384@freenet.carleton.ca (Peter Kowalski) Subject: How/Where can I get gus files without FTP access? Gee. My GUS MAX is very nice. However, I do enjoy keeping my software up-to-date. But unfortunatly, I don't have FTP access, and would like to know how I could get the stuff I want. Building on what I said earlier, is there any patches for Warcraft circulating around? I know that in 3 weeks the real patch is out (how can I get it without FTP?), but want to know if there are any I could try now. (Impatient). ------------------------------ Date: Thu, 1 Dec 1994 20:28:50 -0500 (EST) From: "K.S. Holly" Subject: Indycar Does anyone have advice on how to get satisfactory sound out of Indycar? After 2 years of putting up with BAD emulation, I thought things were starting to turn around, now I'm not so sure. I'm getting really tired of putting up with these hassles and poor sound in games. Then again, aren't we all.... Sorry, I'm just really pissed at this particular moment... Request for advice still stands re:Indycar Kevin ------------------------------ Date: Wed, 30 Nov 94 13:57:01 EST From: Phil Longstaff Subject: Re: GUS Daily Digest V16 #30 GUS Server wrote: > Date: Tue, 29 Nov 1994 17:54:22 -0500 > From: Christian Brideau > Subject: Re: GUS Daily Digest V16 #29 > Message-ID: <9411291754.aa12380@macdonald.revcan.ca> > > Vince, you should REALLY do somthing about those idiots who post the > entire digest again and again and again... I didn't read it entirely > because it was getting on my nerves. And with a 2400 bps modem, you > can understand why. > > Chris > ------------------------------ > > Date: Wed, 30 Nov 1994 10:54:01 GMT > From: Clarke Brunt > Subject: Re: Reading data from a CD ROM > > Wow! 180k of Digest including 7 (unless I lost count) copies of previous > Digests. I think it's a record. Glad I don't subscribe to this on my > dial-up account - can anyone with knowledge of mail headers arrange > that these bounces are lost, rather than re-mailed - perhaps have the > Digest sent out from a different address than the submission address? I don't like that idea because it makes it more difficult to reply. To generate this, I just hit the 'r' key, deleted the parts I didn't need (that is what the bozos^H^H^H^H^Hpeople who resubmit the whole digest need to do), and typed this in. Quite simple, really. Phil -- Phil Longstaff, Motorola ISG, Mississauga Ontario ----------------------------- Date: Wed, 30 Nov 1994 16:43:13 -0500 From: GravisTech@aol.com Subject: Re: GUS Daily Digest V16 #30 >How do you connect the CD audio cable to the GUS if it (connector) has only >three plugs (after cover is removed from connector) which correspond to >right, ground, and left. _________________________________________________ The >>Connectiosn on the GUS go as follows: 4 pin Left Gnd. Gnd. Right (Note: The two gnds are connected on the board) 3 pin >>Left Gnd. Right You just need to make sure that your audio form the cd-rom is going to these connectors on the appropriate pins, if you need a connector to accomplish ------------------------------ Date: Thu, 1 Dec 94 14:35:18 MST From: dchow@stu.athabascau.ca (Donald Chow) Subject: Midas Sound System for Windows? Has anyone gotten Midas for windows to work correctly for them? I'm running a 1meg rev.3.4 GUS w/WFWG3.11 and Qemm7.5, and when I exit windows, or try to, it hangs, and the exit sound gets played in sloooooow motion, then some mod that I'd tried to load earlier, also in sloooooow motion. When I tried to load a mod, it says that there's an error with initializing the MCI device or something like that, and suggests that I restart Windows, but is locks ond goes funky on me. Don -- Donald Chow | X-Phile, GATB & SSTB dchow@a.stu.athabascau.ca | Call (202) 555-6431 for a 'IDDG' time bf298@freenet.carleton.ca | Go-o uchi masuka? ------------------------------ Date: Fri, 2 Dec 1994 04:24:40 -0800 From: dross@ultrix5.cs.csubak.edu (dean ross-smith) Subject: nascar Got Nascar racing from papyrus today. Works wonderful w/ my v2.4 GUS. Uses the new HMI drivers in stereo or mono. According to Papyrus' tech support, the sound is all 8-bit tho. Too bad huh? ------------------------------ Date: Fri, 2 Dec 1994 15:31:31 +1100 From: "M. Wong" Subject: OS/2 drivers? Hi, it is now December and still no word on the protected Mega-EM, and more important, the OS/2 drivers. Let me guess, the OS/2 drivers will be out "REAL SOON NOW (TM)" right? Can someone at Gravis post an OFFICIAL statement regarding the state (or none state) of the OS/2 drivers so that I can quit waiting and hoping? If there is no drivers, fine, say it and I'll dump my GUS in a flash and get a card that is supported. I will *NOT* let a card dictate my operating system. I know, I know, there are the Manley drivers but I want MIDI in PM. ------------------------------ Date: Fri, 2 Dec 1994 06:31:19 -0700 From: "Danny C. Gash" Subject: problem with getting MEGAEM to work with EarthSiege for CD-ROM hmm I have Earthsiege for CD-ROM and I am trying to use MT-32 Emulation... hmm I do megaem -sboff -noems and then it says emulator installed and then I do emuset -mt for MT-32 emulation...ok now after I do that I go to my EarthSiege directory and type soundset and then for midi sound device I pick MT-32 but then when I test the settings it gives me an error and says this: ERROR: SOS: Dectection System Failed to Find Hardware An error occured while testing the playback for the selected driver. Verify the settings and driver are correct. ok that's what it says :(.. hmm so I have no idea why it doesn't want to work so please get back to this post as soon as possible.. :) oh and by the way I have emuset megaem emulation control version 2.03 if that would have anything to do with it Sniper ------------------------------ Date: Thu, 1 Dec 1994 15:57:51 -0800 (PST) From: "Peter C. Chien Jr." Subject: Quest for Glory IV Can someone with a patch for Quest for Glory IV upload it to epas? Thanks. I already have the Sierra 32-bit sound and MIDI patch for the GUS, but I need the specific fix for the game itself. This game is very buggy, as I can only get by certain areas of the game with the GUSDAC disabled (using no sound effects). My friend's computer with a Pro Audio also locks up, so the bugs must be more general. Please upload the Quest for Glory fix to epas, thanks. Peter ------------------------------ Date: Thu, 1 Dec 94 19:19:27 +0100 From: jpdgreve@vub.ac.be (De Greve Jean-Pierre) Hi, I got a good friend who bought himself a GUS MAX. I didn't send in my reg. card yet, but he sent his to Gravis in the Netherlands. After 1.5 month he still didn't receive anything from Gravis. What's wrong here ? We're getting pretty annoyed by the bad Long Distance support. We tried to reach Gravis over the normal voice phone via an AT&T collect call, but AT&T doesn't connect to Canada :-/. So we pulled ourselves together and tried via MCI. No result. I hope anyone can help us with this little problem. I know enough people who lost their registration chance like this. Why does Gravis does not put up an internet server for Digital Registration ? Jean-Pierre. ------------------------------ End of GUS Daily Digest V17 #2 ******************************